Saturday, 25 December 2021

Ho Ho Ho


MERRY CHRISTMAS!!

I hope you all enjoy a day full of many blessing and happy memories.

This is a simple card I made for my son.  He loved it!

So here's what I did to create my card.
  • I began with a piece of white cardstock and cut out the Christmas Token die and set it aside.  
  • I glued the plaid paper behind the cut away circle.  I've had that paper for years so happy to be able to use it.
  • Next, I stamped out the Santa and fussy cut it out.  I really don't like to colour, so I decided I would paper piece him together.  I stamped the Santa again onto some patterned paper, fussy cut it out and glued it onto the Santa.  I did have to colour his face, boots and hands with Copic markers.
  • I glued the die cut panel onto a piece of red cardstock, then glued the Token back into place over that.  
  • I pop dotted Santa over the token and added a shiny white pom pom onto his hat.  
  • I glued it all onto a heavy white card base.

Thanks so much for coming by and taking a look.
I always feel so blessed to receive your wonderful, kind messages and I so appreciate you.

Supplies
Stamps- Jingle all the Way (MFT)
Inks- Copic markers
Paper- heavy white (Scribes Nook- Waterloo, Ontario); dp-?
Accessories and Tools- Misti; Christmas Token die (SSS); pop dots; shiny pom-pom

Tuesday, 21 December 2021

Celebrate the 25th

 


Welcome and Hello
 I recently picked up some lovely stamps from Impression Obsession and wanted to use them.
I looked through my stash and found this inked background that I had embossed with a circle embossing folder.  It looked like the perfect background so I went ahead and used it.

So here's what I did to create my card.
  • Like I mentioned above, I looked through my stash of inked backgrounds.  This one was once again, a paint roll off I did while Gel Plate printing.  I embossed it with a circle embossing folder, then sanded off the raised areas.  It adds so much interest and makes the embossing more visible.
  • I placed the inked/sanded piece into my Misti and stamped the Christmas Word Background over the embossing with some black Versafine Clair ink.  I stamped a few times to get a good impression, then clear heat embossed to help the letters pop.
  • I splattered the whole panel with some white to look like snow.
  • As that dried, I found a scrap of black cardstock and stamped the sentiment (another new one for me from IO) with some Versamark ink and white heat embossed it.  I cut the flag edges to add more interest.
  • I glued the panel onto a heavy white card base, then pop dot mounted the sentiment over that. 


Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Little Red Wagon- DO THEY REALLY KNOW IT'S CHRISTMAS
Crafty Calendar- CHRISTMAS
Corrosive Challenge- ANYTHING GOES
Stamping Sensations- PICK A THEME AND STAMP IT

Supplies
Stamps- Christmas Word Bkg. (IO); Season's Greetings (IO)
Inks- Versafine Clair, Versamark
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- Misti (My Sweet Petunia); clear eb powder; Sizzix circle embossing Folder;
heat tool, sandpaper; acrylic paint; brayer

Sunday, 19 December 2021

Classic Christmas


Good Morning
So much on the go but finding some time to 'play'.  It's good for the soul.
So during my play time, here's what I came up with. 
A simple background using just one part of a stencil...I like to try new things and see what I can make.

I'm also playing with a new to me tool from Waffle Flower called the Stencil Mat.  It's a silicone mat that grips your stencil and has a corner edge detail that is very helpful when using layering stencils.  You can tuck the stencil right into the corner and it won't move.  Then when you are ready to layer, just place the next stencil into the corner for perfect placement.

So here's what I did to create my card.  
  • I pulled out my Stencil Mat and a piece of white cardstock and placed the second part of the Layered Holly stencil onto my paper and rubbed on some Candied Apple Distress Oxide ink.  That gave me the first set of 3 dots in red.
  • I lifted the stencil and rotated it 180 degrees so the berries were now under the first ones I stenciled and applied more of the red DOX ink.
  • I cleaned the red ink off of my stencil and repositioned it with the dots to the left side of the red ones I had already done.  I rubbed on some Rustic Wilderness Distress Oxide ink, lifted the stencil and rotated it again to add the berries on the right hand side.
  • After all the stenciling was done, I was left with this fun dot pattern.
  • To help add interest and define the areas of the dot patterns, I placed the piece into my ScorPal and using my ScorBug, I added the perforated dots that sort of looked like some 'faux' stitching and gave a quilted look.
  • I die cut the snowflake/wreath from some green cardstock and glued that over the dot background.
  • I die cut the sentiment 2 times from some heavy red cardstock and glued them together.  I then glued that over the wreath.
  • I added some red gems to help jazz it up a bit.
  • I glued the finished panel onto some more red cardstock, then onto the green and then finally onto a heavy white card base.



Here is the stencil I used...(just the berries part)

Discount Code for A Colorful Life Designs
(affiliate with not extra cost to you)


Thanks so very much for coming by and taking a look.

Supplies
Stamps- none
Inks- Distress Oxides (TH)
Paper- heavy white (Scribes Nook, Waterloo, Ont.)
Accessories and Tools- Layered Holly stencil (ACLD); Stencil Mat (Waffle Flower); 
Inking Brushes (TE); Wreath and Snowflake die (Sizzix); Sending Cheer die (WPlus9);
gems (Dollar Store); ScorPal; ScorBug, Stencil Mat (Waffle Flower)

Friday, 17 December 2021

Snowflake Wishes


Hello and Welcome.
Snow.....something we don't have at the moment.
I'm not really a fan of it all, but I do like a bit for Christmas.  
Anyways, finishing up a few cards to hand deliver.

So here's what I did to create my card.
  • I pulled out my Gel Plate again, brayer and some acrylic paint.  I brayered my plate with the 2 colours of paint, then pressed the Elegant Snowflake stencil/mask into the paint using the tip of my paintbrush to get good contact with the plate.  
  • I removed the mask which also lifted some of the paint away to give me a faint impression of the snowflake.  
  • I set that aside to dry while I stamped out the sentiment strip from TE.  I placed a piece of navy cardstock into my Misti, stamped the sentiment with some Versamark ink and white heat embossed it.
  • When I looked at the panel, it looked dull and needed something, so I laid the stencil back into place and rubbed on some Hero Arts white ink.  I grabbed my white Posca pen and added some dots along the edges of the snowflake which brought it right to life.
  • I also splattered the whole panel with some more white.
  • I cut the panel down and glued it onto a piece of white cardstock, then onto a heavy white card base.
  • I pop dot mounted the sentiment along the bottom edge.


Here is the stencil I used:

Discount Code for A Colorful Life Designs
(affiliate with not extra cost to you)


Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Little Red Wagon- DO THEY KNOW IT's CHRISTMAS
Watercooler Wed.- ANYTHING GOES
The Paper Funday Challenge- ANYTHING GOES/HOLIDAYS


Supplies
Stamps- Simple Strips Christmas (TE)
Inks- Versamark, HA Unicorn white
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- Elegant Snowflake (ACLD); Gel Plate; Acrylic Paint; 
Speedball brayer; Posca pen; Lawn Fawn eb powder

Thursday, 16 December 2021

Warmest Christmas Thoughts



Hello and Welcome
I hope you preparations for the holidays is going well.
There never seems to be enough time though.
Anyways, I found this background I had made on my Gel Plate and thought I would put it to good use.

So here's what I did to create my card.
  • I began by pulling out my Gel Plate, brayer and some Peeled Paint and Cracked Pistachio Distress Oxide ink.  I pressed the ink pads directly onto the plate and brayered the colours together.
  • I laid the Pretty Victorian Stencil onto my plate, then rubbed some paper to remove some of the ink.  I removed the stencil and took my print by rubbing the cardstock over that.
  • Next, using a piercing tool, I poked some holes along the left edge of the panel to add interest.  
  • I placed the piece into my Misti and stamped the sentiment from Penny Black.
  • I glued that all onto a piece of black cardstock, then onto a piece of green and then finally onto a heavy white card base.
  • I die cut the little snowflake from some white cardstock and glued it to the side of the sentiment. 
  • I added some white pearls near the sentiment and then a green gem in the center of the snowflake.


Here is the stencil I used:
Pretty Victorian 

Discount Code for A Colorful Life Designs
(affiliate with not extra cost to you)


Well that's if for today.
I'm off to our little Santa's workshop with my little daycare kiddos.
We are creating lots of special surprises for their Mom's and Dad's.  
After all, it's the joy of giving I really want to instill in them.
If you ever want to take a peak at what we are working on, go HERE.

Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Little Red Wagon- DO THEY KNOW IT'S CHRISTMAS
CAS on Friday- CHRISTMAS
Sparkles Monthly- VINTAGE CHRISTMAS


Supplies
Stamps- Joyful Wishes (Penny Black)
Inks- Distress Oxide; Versafine Clair
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- Pretty Victorian stencil (ACLD); brayer, Gel Plate; piercing tool;
pearls; Snowflake die- SSS

Tuesday, 14 December 2021

Snowy Afternoon

 


Welcome
Meet my today's snowflake card.
Lots of inks, smooshing and fun.

So here's what I did to create my card.
  • I cut a piece of white cardstock for my card panel.  I rubbed some Broken China Distress Oxide ink onto my non-stick mat, sprayed with water and rubbed the panel into the wet ink.  I used the leftover ink on my mat to create the lines using the edge of a gift card dipped into the wet ink.
  • After drying the panel, I stamped over it with the Snowy Afternoon background stamp using some Cracked Pistachio DOX ink.  The words added a lot of interest.
  • I placed the dry panel into my Misti and positioned the large snowflake to one side.  I randomly pressed on some more Broken China DOX ink over the snowflake, sprayed with water and stamped.  I repeated that process using some Rustic Wilderness and Lucky Clover ink.
  • Lastly, I stamped the sentiment in the left hand corner with some black Versafine Clair and clear heat embossed it.  I added the black gem to the center of the snowflake.
  • I glued it onto a pale blue piece of cardstock, then onto a heavy white card base.

Thanks so much for coming by and taking a look.
I hope you holiday preparations are going well.

Adding my card to these challenges:
Simon Says Wed.- COLD AS ICE
A Place to Start- ANYTHING GOES OPTION BLUE
Love to Craft- ANYTHING GOES

Supplies
Stamps- Hand Lettered Holiday Greetings (MFT); Snowy Afternoon (Studio Light); 
Warm Wishes Snowflake (Colorado Craft)
Inks- Distress Oxides; Versafine Clair
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- Misti (My Sweet Petunia); old gift card; non- stick craft mat; 
clear eb powder; Mister (TH)

Monday, 13 December 2021

Walk in the Woods

 


Welcome
Meet today's card.
A simple one that took no time at all to make.

So here's what I did to create my card.
  • I wanted to create a simple blue sky background so I pulled out my Gel Plate and brayer.  I pressed some Peacock Feathers Distress ink along one side of the plate and then some Salty Ocean along the other side and blended them together using my brayer.  
  • I pressed a piece of heavy white cardstock over the plate and rubbed to lift the print.  It is honestly one of the easiest ways to blend a background.
  • I set that aside to dry then die cut the forest scene from white cardstock.  I love this die....a special gift from a special friend.  To add more interest, I cut along the bottom edge of the die cut before gluing it over the blue background.
  • I stamped the sentiment from and old SU set in the bottom corner.
  • I glued the panel onto a piece of dark blue cardstock, then onto a heavy white card base.
  • I added a few white splatters and then 3 navy dots under the sentiment.

Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Simon Says Wed.- COLD AS ICE
Die Cut Divas- WINTER/ CHRISTMAS
Love to Craft- ANYTHING GOES

Supplies
Stamps- SU (??)
Inks- Distress Oxides, Versafine Clair
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- die (gift from a friend); Speedball brayer; Gel Plate; Posca pen;
gem dots (Dollar Store)