Monday, 23 August 2021

Happy Christmas


Welcome
So glad you stopped by to see what I've been up to.
Here is another holiday card I made with a fun background....easy to do too.

So here's what I did to create my card.
  • The background on this card was very simple to create and took only minutes.  It was inspired by a challenge over at Splitcoast Stampers.  Using a piece of vellum, I coloured the whole piece with different colours of Copic markers.  *You must use an alcohol based marker for this to work*
  • After I was happy with the colouring, I added Rubbing Alcohol with an old paintbrush to make the colours blend.  I set that aside to dry.
  • Using the Wonky Stitched die, I cut a frame and then the sentiment from some white cardstock.
  • I glued the dry piece of vellum onto a piece of white cardstock, then glued that behind the die cut frame.
  • I glued the sentiment over the frame along the bottom leaving room for the snowflake to fit.
  • I die cut a snowflake and glued that into the top corner.
  • I added foam tape to the whole back of the framed piece and glued that onto a heavy white card base.  

Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Sparkles Christmas- CHRISTMAS MUSIC
(We wish you a Merry Christmas)
Simon Says Wed.- ADD A SENTIMENT

Supplies
Stamps- none
Inks- Copic markers
Paper- vellum, heavy white (Scribes Nook- Waterloo, Ont.) 
Accessories and Tools- Merry Christmas die (SSS); snowflake die (Spellbinders); 
Rubbing Alcohol; Wonky Stitches die- (Avery Elle); old paintbrush

Sunday, 22 August 2021

Masculine Birthday


Welcome
My vacation time is coming to an end so I won't have as much time to play. 
So I'm trying to get a few more cards I created posted before I'm back to work.

Here's how I created this fun birthday card.
  • I decided to make a side fold card....one of my fav folds.  It's very easy to do and gives a nice change from the usual A2 card.  All instructions how to do this fold are HERE.  
  • I'm using this fun turnabout stamp called Paint Swash from Concord and 9th.  I positioned my paper and stamp into my Misti and inked the stamp with the first colour and pressed onto my paper.  **to see a video about how to use these stamps see the Concord and 9th site here** 
  • I turned the cardstock in my Misti, positioned it again and stamped the next colour.  I did that 2 more times; 4 stampings in total.  The colours I used were: Carved Pumpkin, Broken China, Barn Door and Seedless Preserves Distress Oxide ink.  
  • This set also comes with a few additional stamps that you can use randomly over the pattern you just stamped.  I added those with some Versafine Clair ink.
  • After all the stamping was done, I splattered the inked cardstock with my white Posca pen.  I cut the panel as measurements linked above for my card front, then glued it all down.
  • I die cut the sentiment and glued it over the stamped background.

Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Simon Says Wed.- ADD A SENTIMENT
The Male Room- BIRTHDAY CELEBRATION


Supplies
Stamps- Paint Swash (Concord and 9th)
Inks- Versafine Clair, Distress Oxides
Paper- heavy white (Scribes Nook-Waterloo, Ont.)
Accessories and Tools- Misti (My Sweet Petunia); Posca pen; die (MFT); 
Nuvo glue; black gem 

Saturday, 21 August 2021

Precious Memories

 


Welcome
Meet today's card.
I was so happy with how it turned out.
I seldom to never use black cardstock so when it all worked, it made me glad.
I used some bleach to change the colour.

So here's what I did to create my card.
  • I cut a black cardstock panel, placed it into my Misti and stamped the Winter Floral Mix Background with some Versamark ink.  I white heat embossed that and let it cool.
  • Time to bleach out the black.....not all cardstock will take away the colour of the paper so you need to test it before starting. I had tested mine on a scrap so I knew it would work.  Try to work in a ventilated area as well.
  • Using an OLD paintbrush, I painted in just areas of the background as I wanted to let the black show through.
  • I set it aside to let the black bleach out.  When it was dry, I noticed I had missed a few areas, so I went back in and cleaned them up hence the colour variation of the bleached areas.
  • While it all dried, I grabbed a scrap piece of black and stamped the sentiment with Versamark ink and then white heat embossed it.
  • Before I glued the black stamped panel onto a piece of matching cardstock, I splattered with my white Posca pen, then glued it onto a heavy white card base.
  • I pop dot mounted the sentiment to the side.



Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Simon Says Wed.- ADD A SENTIMENT


Supplies
Stamps- Winter Floral Mix (SSS); Being Unique (Tech Tues)
Ink- Versamark
Paper- black cs (Michaels); heavy white (Scribes Nook-Waterloo, Ont.)
Accessories and Tools- bleach; old paint brush; Lawn Fawn white EB powder; heat tool;
pop dots; white Posca pen

Friday, 20 August 2021

Pink Pretty


Welcome
Here is another Gel Plate print that I made while I was taking a class from Vicki Boutin...so fun.
This leaf is a mask called Skeleton Leaf from ACLD called and I just love the detail I was able to get using it.

So here's what I did to create my card.
  • I started by getting out this Gel Plate print I had made during the class.  I made it by brayering some pink paint onto my Gel Plate, then pressed the Skeleton Leaf mask over the plate being sure to get good contact.  
  • I lifted the stencil, then let the paint on the plate dry. (to get a good 'ghost' print on your Gel Plate, you need to be sure and let the paint on the plate dry completely)
  • When the plate was totally dry, I brayered some white acrylic paint over it all...a thin coat, then rubbed on my cardstock to lift the print.
  • When the print was dry, I placed it into my Misti and stamped the sentiment from Pinkfresh Studios. 
  • I sprayed the panel with some Sheer Shimmer to give it a bit of sparkle and interest.
  • Finally, I glued it onto a heavy white card base and then added 3 gems to finish it off.


Thanks so much for coming by and taking a look.

Here is the mask I used:

Discount Code for A Colorful Life Designs
Adding my card to these challenges:
Simon Says Wed.- ADD A SENTIMENT
Crafty Creations- ANYTHING GOES
Sparkles Monthly- MONOCHROMATIC

Supplies
Stamps- Scripted Bold Sentiments (Pinkfresh Studios)
Inks- Versafine Clair, Basics Acrylic Paint
Paper- heavy white (Scribes Nook- Waterloo, Ont)
Accessories and Tools- Skeleton Leaf Mask (ACLD); Misti (My Sweet Petunia); Gel Plate, brayer, 
Sheer Shimmer Spray (Imagine), clear gems (Dollarama)

Thursday, 19 August 2021

Polar Bear Fun


Welcome
Meet today's card.
A fun and simple one for the holidays and trying out another fun technique that is new to me.

So here's what I did to create my card.
  • I began by cutting a piece of heavy white cardstock to use as the front panel.  I tore little pieces of masking tape and randomly stuck them to the bottom portion of the cardstock panel being sure to leave some texture when applying the tape.
  • Using a brush, I covered the tape with Gesso to seal it and securely adhere it to my card panel. 
  • When the Gesso was all dry, I painted on some white acrylic paint over the tape to give the illusion of snow.
  • When all was dry, I got out some Distress Oxide inks (Salvaged Patina, Faded Jeans, Broken China) and rubbed them over the top of the card where there was no tape.  (You can see where some of the Gesso and paint went past the tape and resisted the inks making it look more like an iceberg)


  • I splattered using my white Posca pen then let that dry.
  • I stamped the Polar bear in my Misti, fussy cut it out and add some colour using my Copic markers.  
  • The white splatters had dried, so I stamped the sentiment with some Versafine Clair ink in my Misti and clear heat embossed it. 
  • I mounted it onto a heavy white card base and pop dotted the bear over the snow.


Thanks so much for coming by and taking a look.

Adding my card to these challenges:
Simon Says Wed.- ADD A SENTIMENT
Little Red Wagon- ANIMAL ANTICS


Supplies
Stamps- Warm Wishes (TE), Polar Bear Pals (MFT)
Inks- Versafine Clair, Distress Oxide, Copic markers
Paper- heavy white (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- masking tape, Posca pen, Gesso, white acrylic paint, pop dots, paintbrush,
Misti (My Sweet Petunia)

Wednesday, 18 August 2021

Reindeer Greetings

 


Welcome
I tried something new-to-me today....napkin art.
Simply put, use a napkin to create a card.  
I was off to search for a napkin with a picture on it for my card.

So here's what I did to create my card. 
  • After I found this cute little paper napkin in the drawer, I pulled the backing away from the image side of the napkin.  Using a glue stick, I glued it onto a piece of white cardstock and set aside to dry.  (I did that with 2 separate napkins, as I knew I wanted to cut the pieces out of one of them)
  • When they were dry, I coated them with some Vicki Boutin Gel Medium to seal them up and bond them to the cardstock background.  I left them to dry again before going onto the next steps.
  • When dry, I trimmed up one of the reindeer panels to fit on the front of a 4 1/4 x 4 1/4" square card base.  
  • I placed the panel into my Misti and stamped the sentiment from Paper Smooches in the bottom corner.  
  • I pop dotted the stamped panel onto the card base, then using the second piece I had added the Gel Medium over, I cut out the reindeer's scarf and pop dotted that back into place.


Thanks so much for coming by and taking a look.


Supplies
Stamps- Holiday Cheer (Paper Smooches)
Inks- Versafine Clair
Paper- white cardstock (Scribes Nook- Waterloo, Ont.)
Accessories and Tools- Misti (My Sweet Petunia); napkin (Dollarama); VB Gel Medium; 
paint brush

Tuesday, 17 August 2021

Rock Star


Welcome
Meet today's card.
A very simple, one layer card I created using a stencil, my Distress Oxide inks and a couple of stamps.
I decided to create a one layer card as I haven't done one for so long....I'm also playing along with the DTGD Challenges over at Splitcoast Stampers.

So here's what I did to create my card.
  • I cut my card base- A2 from some heavy white cardstock so my finished card was 5 1/2 x 4 1/4".  
  • I wanted a nice white border around my image, so I placed the Marvelous Masks Deckle Rectangle over my paper, centering it.  I love using these masks, so simple to use and no more torn paper on the edges.  Over that I laid the Corner Rays stencil from A Colorful Life Designs and secured them on my Make Art Station with magnets.   
  • Using my blender brushes, I blended on some Distress Oxide inks. (Mustard Seed, Carved Pumpkin)  When I was happy with the inking, I removed both masks and set them aside.
  • I placed the card into my Misti and stamped the Rock Silhouette to one side, the the Something Incredible sentiment on the other side.
  • That's it, done in no time at all



Here are the stencils I used to create my card:




Discount Code for A Colorful Life Designs

Thanks so much for coming by and taking a look.

Adding my card to these challenges:
CASology- MASK
CAS on Friday- FAVORITE STAMP 
(I love this stamp, makes for great cards for a guy)
The Male Room- OUR 8th BIRTHDAY


Supplies
Stamps- Rock Silhouette (IO); Something Incredible (IO)
Inks- Distress Oxides; Versafine Clair
Paper- heavy white (Scribes Nook- Waterloo, Ont)
Accessories and Tools- Corner Rays stencil (ACLD); Mask (ACLD); Make Art Station (Ranger);
TE Blending Brushes;